Providing global clients with prime Shougang silicon steel coils, high-speed progressive stamping, and Backlack self-bonding stator & rotor core assemblies.
As the electric vehicle (EV) industry and high-efficiency industrial compressors move toward higher rotational speeds and power densities, motor stators and rotors face unprecedented centrifugal forces and electromagnetic stresses. Traditional non-oriented electrical steels often force engineers into a difficult trade-off: sacrificing mechanical yield strength to achieve low iron loss, or accepting high high-frequency core loss to retain physical durability.
To break through this design bottleneck, Shougang Zhixin Electromagnetic Materials developed 25SWYS900—a 0.25mm ultra-thin, ultra-high-strength non-oriented electrical steel specifically engineered to meet the stringent demands of high-rpm motion control, low-loss traction drives, and premium motor architectures.

























The 25SWYS900 grade combines extreme mechanical yield strength with ultra-low high-frequency core loss, establishing a new benchmark for high-speed traction and compressor motor laminations.
| Performance Category | Key Parameters | Guaranteed Value | Typical Value | Standards&Application Highlight |
|---|---|---|---|---|
| Physical Properties | Thickness(d) Density(ρ) | 0.25 mm— | 0.25 mm7.60 kg/dm³ | Nominal thickness Conventional density for loss calculations |
| Low Loss&High Saturation Magnetic Performance | Core Loss(P1.0/400) Polarization(J50) | ≤60 W/kg ≥1.50 T | 46 W/kg 1.53 T | Tested @1.0T,400Hz(GB/T 3655) Tested @5000 A/m(GB/T 3655) |
| High-Speed Rotor Ready Mechanical Strength | Yield Strength(Rp0.2) Tensile Strength(Rm) Hardness/Elongation | ≥900 MPa ≥940 MPa — | 950 MPa 980 MPa 320 HV1/3% | GB/T 228(High centrifugal load resistance) GB/T 228(Extreme physical durability) GB/T 4340 |
| Dimensional Precision | Longitudinal Deviation Transverse Deviation Stacking Factor | ≤0.008 mm ≤0.010 mm ≥95% | 0.004 mm 0.005 mm — | High-precision progressive stamping ready Uniform stack balance&minimal air gaps GB/T 19289 |
Engineering Highlight: With a yield strength reaching 950 MPa and typical core loss at 400Hz kept down to46 W/kg,25SWYS900provides high-rpm rotors with structural integrity against high centrifugal deformation while eliminating eddy current buildup.
Surface coating technology is crucial for controlling core loss and ensuring structural rigidity. 25SWYS900 offers multi-scenario coating solutions, including inorganic/organic hybrid insulation (C5) and specialized Self-Bonding Coating (Backlack Technology).
| Coating Code | Coating Category | Core Advantage&Thickness | Primary Application Scenarios |
|---|---|---|---|
| M1 | C5 Insulation Semi-organic(Cr-Free) | •0.4–1.2μmthickness •Resistance≥3Ω·cm²/lam | Eco-friendly C5 coating for standard interlocking or welded stator/rotor stacks. |
| M4 | C5 High Resistance Semi-organic | •0.4–1.2μmthickness •Resistance≥3Ω·cm²/lam | Standard C5 coating engineered for general high-efficiency industrial motors. |
| M3/M7 | C3 Self-Bonding Organic(Backlack) | •1.0–5.0μmthickness •Resistance≥10Ω·cm²/lam | High-Frequency&Ultra-Low NVH Cores Thermal-activated bonding for rivet-free traction rotors. |
┌─────────────────────────────────────────┐
│ 0.25mm Precision Silicon Steel │
│ (Longitudinal Dev. ≤ 0.004mm) │
└────────────────────┬────────────────────┘
│
▼
┌─────────────────────────────────────────┐
│ Precision Progressive Die Stamping │
└────────────────────┬────────────────────┘
│
┌─────────────────────┴──────────────────────┐
▼ ▼
┌────────────────────────────────────┐ ┌────────────────────────────────────┐
│ Traditional C5 Lamination │ │ Backlack Self-Bonding Stack │
│ (Cleat / Weld / Interlocking) │ │ (In-Mold / Thermal Curing) │
└──────────────────┬─────────────────┘ └──────────────────┬─────────────────┘
│ │
▼ ▼
• High-Efficiency HVAC Compressors • Ultra-High-Speed EV Traction Rotors
• Standard Industrial Servo Motors • Zero-Noise, Rivet-Free Stator Stacks
As a specialized manufacturer and distributor in electromagnetic materials,we offer a full service matrix ranging fromShougang prime raw material sales(508mm ID coils,3–8 tons)tocustom progressive die stamping and Backlack bonding assembly.
| Core Service Line | Key Technical Capabilities | Customer Value&Delivery Scenarios |
|---|---|---|
| Material Distribution Silicon Steel Coil Supply | •Prime Shougang 25SWYS900 inventory in stock •Custom slitting width&leveling(Coil ID 508mm) •Flexible MOQ for prototype&mass production | Reduces raw material lead times and inventory costs while guaranteeing original Mill Test Certificates(MTC). |
| Precision Manufacturing High-Speed Stamping | •High-speed press lines with strict burr control •Precise thickness control(≤0.004 mm longitudinal) •Wire EDM prototype cutting for rapid design iterations | Ensures precise dimensional accuracy and geometric stack balance for optimal motor air-gap uniformity. |
| Advanced Stacking Backlack Core Curing | •Thermal curing press setup(200-240°C,1-3MPa) •100%stress-free lamination bonding •Zero rivet/zero welding construction | Completely eliminates interlamination short circuits,significantly lowering high-frequency iron loss and NVH noise. |
Mastering the extreme manufacturing of Shougang 25SWYS900 and Backlack self-bonding technology for electric vehicle(EV)traction drives and high-efficiency industrial compressors.
As a specialized electromagnetic material distributor and precision core manufacturing factory,Youyou Technologycombines prime mill-direct supply ofShougang 25SWYS900(0.25mm high-strength non-oriented electrical steel)with advanced processing capabilities.Our engineering and production teams are led by senior material experts specializing inhigh-speed progressive die stamping,Backlack self-bonding thermal curing(M3/M7 coatings),and strict thickness deviation control(longitudinal≤0.004mm).From raw coil distribution and DFM tooling evaluation to rivet-free rotor stack manufacturing,we bridge the gap between high-frequency magnetic optimization and scalable mass production.
To date,we have partnered withover 30 global motor innovatorsacross theelectric vehicle(EV)industry and high-efficiency industrial compressor sectors—delivering custom-engineeredstator and rotor lamination stacksthat completely eliminate interlamination short circuits,suppress PWM harmonic core losses,and unlock unmatched volumetric power density in high-rpm operating environments.
Ready to Source Shougang 25SWYS900 or Custom Motor Cores?
Whether you need prime0.25mm silicon steel coilswith original MTC or expert execution inBacklack thermal curing and high-speed stampingfor EV traction motors and compressor drives,Youyou Technology is ready to deliver sample prototypes and volume production.
As a specializedCustom Precision Motor Core Factory,Youyou Technologyensures rigorous quality assurance acrossShougang 25SWYS900 0.25mm ultra-thin electrical steel,vacuum-annealed soft magnetic alloys,andRivet-Free Backlack Stacks—guaranteeingmicro-burr≤0.005 mm,precise skew angle tolerance,andshear strength≥20 MPa(M3/M7 thermal stability)to survive the brutal weight,high-frequency iron loss,and centrifugal constraints of stratospheric flight.
Skew Angle&Slot Alignment:High-precision progressive tooling locks helical trajectories on 0.25mm laminations,preventing slot distortion and ensuring effortless automatic wire winding for high-performance aerospace propulsion motors.
Full-Surface Shear Strength&950 MPa Yield:Combining Shougang 25SWYS900's high mechanical strength (yield strength ≥ 900 MPa) with M3/M7 Backlack resin thermal bonding (shear strength 20 ± 5 MPa at 200–240°C curing) guarantees complete structural integrity under extreme centrifugal stresses.
Micro-Burr & Precision Thickness Control: Stamping burrs strictly controlled under ≤ 0.005 mm backed by exceptional longitudinal thickness deviation (≤ 0.008 mm) on 0.25mm steel sheets, protecting fine magnet wire and maximizing slot fill.
Ultra-Low Core Loss & NVH Suppression: Rivet-free magnetic symmetry paired with Shougang 25SWYS900's low typical core loss(46 W/kg @1.0T/400Hz)suppresses high-frequency PWM harmonic losses and operating acoustic noise by up to5 dB.

We specialize in prime mill-direct distribution and precision processing ofShougang 25SWYS900—an advanced 0.25mm ultra-thin,ultra-high-strength non-oriented electrical steel specifically engineered to conquer high-frequency core loss and extreme mechanical stresses in electric vehicle(EV)traction drives and high-efficiency industrial compressor systems.
With a guaranteed yield strength of≥900 MPa(typical 950 MPa)and a tensile strength reaching980 MPa(tested via GB/T 228),25SWYS900 allows rotor designs with thinner flux bridges to safely withstand rotational speeds exceeding 18,000 RPM without mechanical deformation.
Utilizing M3/M7 organic self-bonding coatings(C3 classification,1.0–5.0µm thickness),our thermal-activated in-mold curing process($200\text{--}240^\circ\text{C}$,$1\text{--}3\text{MPa}$)delivers a bonding shear strength of20±5 N/mm²(DIN EN 1465).This rivet-free,stress-free construction eliminates interlamination short circuits and minimizes NVH noise.
Shougang 25SWYS900 delivers a guaranteed specific total iron loss $P_{1.0/400}$ of≤60 W/kg(with typical values as low as46 W/kg@ 1.0T,400Hz,tested via GB/T 3655)and a magnetic polarization $J_{50}$ of≥1.50 T,drastically reducing thermal dissipation[cite:1].
We provide a complete turnkey solution:directShougang silicon steel coil distribution(508mm ID,3–8 tons with original MTC),high-speed progressive die stamping with strict dimensional precision(longitudinal thickness deviation≤0.004 mm,transverse deviation≤0.010 mm),and specialized Backlack thermal bonding[cite:1].
Seeking a premier precision motor core manufacturer and silicon steel distributor specializing inShougang 25SWYS900 0.25mm ultra-thin electrical steel,Backlack self-bonding technology,andhigh-speed progressive stamping?Look no further!By combining prime mill-direct material supply with thermal-activated in-mold resin bonding(shear strength 20±5 N/mm²),Youyou Technologycompletely eliminates interlamination short circuits,slashes high-frequency core losses down to 46 W/kg @1.0T/400Hz,and guarantees a high stacking factor of≥95%.From high-rpm electric vehicle(EV)traction drives to high-efficiency industrial compressors,we deliver rigid,rivet-free soft magnetic core solutions with superior yield strength(≥900 MPa)and high-frequency efficiency.
Contact our engineering team today to requestShougang 25SWYS900 material samples and original MTC,get5–7 day prototyping quotes,or receive a freeDFM feasibility and Backlack thermal-curing evaluationfor your high-speed motor project!
Get Your Custom Quote Now