In the fast-paced FPV micro-drone market (TinyWhoops, Toothpicks, and 1S–2S ultralight micro-builds), motor efficiency directly dictates flight times, thermal endurance, and throttle responsiveness. Engineering teams developing 1102, 1103, 1104, 1105 and 1106 series micro BLDC motors face a constant structural challenge: custom-stamped or wire-cut stators require weeks of lead time and heavy tooling costs, while substandard lamination processes introduce extreme iron losses at 30,000+ RPM. Stock quantities are available for immediate dispatch—no tooling NRE, no 4–6 week wait.
To solve these rapid prototyping motor laminations and supply chain bottlenecks, Youyou Company provides in-stock OD11mm × ID5mm 9N12P micro stator laminations. Designed for high-frequency micro propulsion and ready for immediate global dispatch, these stock stators empower engineers to bypass 4-to-6-week prototype delays and move directly to bench-testing winding schemes and KV ratings.
The OD 11.0mm, ID 5.0mm, 9N12P footprint is the industry-standard geometry for compact outrunner motors. Using a low cogging torque 9N12P stator layout delivers high slot-fill capability, smooth torque delivery, and linear throttle response across aggressive pitch changes in 1103 brushless motor stator laminations and neighboring 11xx builds.
| Parameter | Standard Specification | FPV Propulsion Advantage |
|---|---|---|
| Outer Diameter (OD) | 11.00 mm (±0.01 mm) | Fits standard 1102 / 1103 / 1104 / 1105 / 1106 housings |
| Inner Diameter (ID) | 5.00 mm (±0.01 mm) | Accepts 5mm bearing/shaft mount post |
| Topology | 9 Slots / 12 Poles (9N12P) | Low cogging, smooth torque & high RPM capability |
| Steel Thickness Option | 0.10mm / 0.15mm / 0.20mm | Minimizes high-frequency eddy current loss |
| Interlaminar Bonding | Backlack (Self-Bonding) | Zero mechanical rivet damage or weld shorting |
| Slot Wall Finish | Precision Wire EDM / Stamping | Smooth, burr-free surface protects magnet wire |
Thickness selection guide: For 2S–3S 1103 builds targeting 30,000+ RPM, 0.15mm offers the best balance of stamping robustness and eddy-current suppression; 0.10mm is recommended for extreme-RPM bench validation only. 0.20mm suits cost-sensitive 1S micro builds.




























FPV motors operate under intense electrical frequencies.Traditional 0.35mm silicon steel laminations generate immense iron losses(Pfe),causing rapid thermal buildup,battery drain,and magnet demagnetization.
By utilizing high-grade ultra-thin electrical steel(0.15mm/0.10mm),our OD11mm stators reduce eddy current losses by 50%to 60%.
On a tiny 11mm tooth,laser welding or interlocking creates physical stress and short-circuits interlaminar insulation,creating hot spots that degrade overall efficiency.
Backlack varnish activates under heat and pressure,bonding laminations 100%across the surface without burrs or structural distortion.
| Steel Thickness | Test Condition | Typical Iron Loss | Recommended Use |
|---|---|---|---|
| 0.20 mm | 1.0 T/400 Hz | ≤8.5 W/kg | 1S micro builds,cost-sensitive |
| 0.15 mm | 1.0 T/800 Hz | ≤14.5 W/kg | 2S–3S 1103,30,000+RPM |
| 0.10 mm | 1.0 T/1,000 Hz | ≤18.0 W/kg | Extreme-RPM bench validation |
-Typical values for reference only;actual performance depends on grade,annealing,and stack height.Third-party test reports(SGS/CTI)available upon request.
| Topology | Strength | Best For |
|---|---|---|
| 9N12P | High RPM,fast throttle response,lower cogging | FPV racing,TinyWhoop,ultralight micro |
| 12N14P | Higher torque density,smoother low-speed rotation | Cinematic/long-endurance micro,gimbal |
While engineered primarily forFPV micro drones,thisOD11mm ID5mm 9N12Plamination geometry is equally optimized for:
Flexible Stack Heights:Available from 1.5mm to 10.0mm according to your power density requirements.
Insulation&Coating:Parylene coating,epoxy powder coating,or plastic end-caps for high-voltage isolation.
Mass Production Readiness:Transition effortlessly from prototype stock evaluations to custom progressive die stamping with in-die auto-stacking at Youyou Company.
Eliminate prototype waiting periods and test your micro motor designs this week.Contact Youyou Company to request CAD drawings,stack quotes,or evaluation samples.
Our in-stockOD11mm×ID5mm 9N12Pstator lamination stack is the industry-standard footprint engineered for ultralight1102,1103,and 1104 series micro BLDC motors(used in TinyWhoops,Toothpicks,and 1S–2S FPV micro-drones),as well as micro camera gimbals and miniature robotic joint actuators.
To suppress severe iron losses($P_{fe}$)at 30,000+RPM,we process ultra-thin silicon steel laminations in0.10 mm,0.15 mm,and 0.20 mm.Choosing 0.15 mm or 0.10 mm steelreduces high-frequency eddy current losses by 50%to 60%compared to standard 0.35 mm laminations,extending battery endurance and preventing motor overheating.
On a micro 11mm stator tooth,mechanical rivets or laser welding cause thermal distortion and destroy interlaminar insulation,creating hot spots.OurBacklack in-mold self-bonding coatingbonds laminations 100%across the surface without burrs or stress,achieving a stacking factor ofKFe>97%while completely protecting fine magnet wire during winding.
Yes.Because we maintainready-to-ship inventory of OD11mm ID5mm 9N12P stators,engineering teams can order small evaluation batches for rapid KV rating and winding validation withzero upfront NRE tooling feesand zero 4-to-6-week prototype wait times.
We supply flexible stack heights ranging from1.5 mm to 10.0 mmbased on your target torque density.Additionally,we provide custom secondary processing includingParylene conformal coating,epoxy powder insulation,plastic end-caps,and a seamless path to high-volume progressive die stamping at Youyou Company.
Seeking a premier precision motor core manufacturer offering ready-to-ship stators for1102,1103,and 1104 series micro BLDC motors?Look no further!Youyou Companymaintains an active stock ofOD11mm×ID5mm 9N12P stator lamination stacks,engineered with ultra-thin electrical steel(0.10mm,0.15mm&0.20mm)and full-surfaceBacklack in-mold self-bonding coating.By completely eliminating mechanical weld shorting and interlaminar air gaps,we deliver high-frequency efficiency,suppress 30,000+RPM eddy current losses by 50%–60%,and achieve a superior lamination stacking factor of≥97%without any burr distortion(<0.003 mm)on fragile magnet wires.
Bypass 4–6 week prototyping delays and zero NRE tooling barriers!Contact our engineering team today to request3D STEP/2D CAD files,checkin-stock stack heights,or receivefree evaluation samplesfor your micro drone and robotics motors!
Request In-Stock Samples&CAD Files